کنترلر I/O هوشمند موگزا مدل ioThinx E2210
Brand: موگزا- مشخصات محصول
- دانلود
- Description
مشخصات محصول
| Language | Click&Go |
|---|---|
| Rotary Switch | 0 to 9 |
| Ethernet | 1.5KV network isolation protection, 1*RJ45 Port w/10/100T(X) |
| Management | BOOTP, DHCP Clien, HTTP, IPv4, SMTP, TCP/IP |
| Protocols | CGI commands, Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, SNMPv1 Trap, SNMPv1/v2c/v3 |
| Serial ports | 1 Serial port |
| Connector | Terminal block |
| Serial Standards | RS-485 |
| baudrate | 115200 bps, 1200 bps, 1800 bps, 19200 bps, 2400 bps, 300 bps, 38400 bps, 4800 bps, 57600 bps, 600 bps, 9600 bps |
| Flow Control | |
| Data Bits | |
| input voltag | 12 to 36 VDC |
| Output Current | 2 A (max.) |
| Housing/Body/Construction | Plastic |
| Mounting | Wall mounting, DIN-Rail Mounting |
| EMC | EN61000-6-2, EN 61000-6-4 |
| Digital Input Channels | 12 |
| Digital Output Channels | 8 |
| I/O Mode | DI or event counter |
| I/O Type | Sink |
| Authentication | Local database |
| Encryption | HMAC |
| Current Rating | 200 mA per channel |
| LED Indicator | PWR, Serial, I/O Status, RDY |
| Operating Temperatures | -10° to 60° C |
| Ambient Relative Humidity | 5 to 95%, (non-condensing) |
| EMI | |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1000 MHz: 3 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF |
| Safety | UL 508 |
| shock | IEC60068-2-27 |
| isolation | 3k VDC or 2k Vrms |
ioLogik E2210 Introduction:
Moxa’s ioLogik ioLogik E2210 Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2210 will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2210 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
ioLogik E2210 Features:
- Front-end intelligence with Click&Go control logic, up to 24 rules
- Active communication with MX-AOPC UA Server
- Saves time and wiring costs with peer-to-peer communications
- Supports SNMP v1/v2c/v3
- Friendly configuration via web browser
- Simplifies I/O management with MXIO library for Windows or Linux
- Wide operating temperature models available for -10 to 60°C standard