Antaira LMP-1002G-SFP-24

10-Port Industrial Gigabit PoE+ Managed Ethernet Switch with 8*10/100/1000Tx (30W/Port), and 2*100/1000 SFP Slots); 12~36VDC power input

توضیحات

Introduction:

Antaira’s LMP-1002G-SFP-24 series is a 10-port industrial Gigabit PoE+ managed Ethernet switch embedded with 8*10/100/1000Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30W/port, and 2*100/1000 dual rate SFP slots for Gigabit fiber connections. It is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, port lock, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The LMP-1002G-SFP-24 series is IP30 rated and DIN-rail mountable. There are is a  wide operating temperature model for a standard temperature range (STD: -10°C to 70°C) . This series supports a dual power input having a low voltage range (12~36VDC) and a built-in voltage booster allowing the unit to give a full 48VDC PoE power for any mobile PoE application or any low voltage power sourcing environment. It also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS and any other outdoor or harsh environment.

Key Features:

  • Supports 8*10/100/1000Tx IEEE 802.3at/af Compliant with 30W/Port, and 2*100/1000 SFP Slots for Fiber Connections
  • Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
  • Supports IPv4/IPv6, and DHCP Option 66/67/82
  • Supports Modbus/TCP Protocol for Device Management and Monitoring
  • Configuration: Web Console, Telnet, CLI Command
  • IGMP v1/v2 for Multicast Traffic Filtering
  • QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism
  • 1Q VLAN for Easy Network Planning
  • Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL
  • Port Lock Function for Unauthorized Access Based on MAC Address Blocking
  • Auto Warning by Exception through E-mail, Relay Output
  • Support RMON Function for Efficient Network Monitoring
  • Support Port Mirroring for Online Diagnostic
  • Low Power Input 12~36VDC (w/Voltage Booster)
  • 5-Year Warranty

مشخصات محصول

Standards

IEEE 802.1d STP (Spanning Tree Protocol), IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization, IEEE 802.1Q for VLAN Tagging, IEEE 802.1s MSTP (Multiple Spanning Tree Protocol), IEEE 802.1w RSTP (Rapid Spanning Tree Protocol), IEEE 802.1x for Network Authentication, IEEE 802.3 10Tx Ethernet, IEEE 802.3ab 1000BaseT, IEEE 802.3ad Link Aggregation (LACP), IEEE 802.3at/af PoE (Power-over-Ethernet), IEEE 802.3U 100Tx Fast Ethernet, IEEE 802.3x Flow Control for Full Duplex, IEEE 802.3z 1000Base-X, ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch)

protocol support

DHCP Option 66/67/82, HTTP, HTTPS, IGMPv1/v2, IPv4/IPv6, LLDP, Modbus/TCP, RMON, SMTP, SNMPv1/v2c/v3, SNTP, SSH/SSL, Syslog, Telnet, TFTP

Back-Plane

20.0 Gbps

configuration option

CLI, Telnet, Web Console

MAC Table Size

Ethernet

8*RJ45 Ports w/10/100/1000Tx (PSE 30W/Port), auto MDI/MDI-X connection, auto negotiation speed, Full/Half duplex mode

Fiber Ports

2*100/1000 SFP Slot

Console

1*RS232 in RJ45 connector with console cable, 115.2Kbps, 8,N,1

LED Indicator

Per Unit: Power 1 & 2 (Green), Fault (Red), PoE: Feeding Power (Green)

input voltage

12~36VDC, Redundant Input

Housing Protection

IP30 rated, Metal

Mounting

DIN-Rail Mounting, Wall Mount

Operating Temperatures

-10° to 70°C

Ambient Relative Humidity

5 to 95%, (non-condensing)

EMI

EMS

EN61000-4-2,3,4,5,6,8, EN61000-6-2, 4

Free fall

shock

IEC60068-2-27

vibration

IEC60068-2-6

Green

Certification

, , ,