سوییچ شبکه صنعتی آنتایرا مدل LMP-1002G-10G-SFP
Brand: آنتایرا10-Port Industrial PoE+ Light Layer 3 Gigabit Managed Ethernet Switch, with 8*10/100/1000Tx (30W/Port) and 2*1G/10G SFP+ Slots
- توضیحات
- مشخصات محصول
- دانلود
توضیحات
LMP-1002G-10G-SFP Introduction:
Antaira Technologies’ LMP-1002G-10G-SFP is a 10-port industrial gigabit managed Ethernet switch that is embedded with eight PoE+ gigabit Ethernet ports and two dual rates (1G/10G) SFP+ slots for fiber connection. This is a fully manageable industrial Ethernet switch pre-loaded with standard light layer 3 network management software. It supports jumbo frame and wide bandwidth for data transmission and has sufficient port counts for edge-level connectivity solutions.
The LMP-1002G-10G-SFP has a compact form factor design with an IP30 rating, DIN-rail mounting, and standard operating temperature support from -40°C to 60°C. It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water/wastewater, or any other outdoor or harsh environment. The two 10 gig SFP+ ports deliver high bandwidth support to applications requiring greater speeds of connectivity.
LMP-1002G-10G-SFP Key Features:
- Supports 8*10/100/1000Tx IEEE 802.3at/af Compliant with 30W/Port
- Supports 2*1G/10G SFP+ Slots
- Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
- Supports IPv4/IPv6, and DHCP Option 66/67/82
- Supports Modbus/TCP Protocol for Device Management and Monitoring
- IGMP v1/v2 for Multicast Traffic Filtering
- IEEE802.1Q VLAN for Easy Network Planning
- Power Input: 48~55VDC in 6-Pin Terminal Block
- Reverse Polarity Protection
- IP30 Protection
- DIN-Rail or Wall Mountable
- Operating Temperature Range – STD: -40° to 60°C
- 5-Year Warranty
مشخصات محصول
Standards | IEEE 802.1AB Link Layer Discovery Protocol (LLDP), IEEE 802.1d STP (Spanning Tree Protocol), IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization, IEEE 802.1Q Virtual Local Area Network (VLAN), IEEE 802.1s MSTP (Multiple Spanning Tree Protocol), IEEE 802.1w RSTP (Rapid Spanning Tree Protocol), IEEE 802.1x for Network Authentication, IEEE 802.3 10Tx Ethernet, IEEE 802.3ab 1000BaseT, IEEE 802.3ad for Port Trunk with LACP, IEEE 802.3ae 10 Gigabit Ethernet, IEEE 802.3at/af PoE (Power-over-Ethernet), IEEE 802.3U 100Tx Fast Ethernet, IEEE 802.3x Flow Control, IEEE 802.3z Gigabit Fiber, ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch) |
---|---|
Back-Plane | 56.0Gbps |
protocol support | Console Port, DHCP server, DHCPv6 client, DNS client/proxy, ICMPv6, IP based Access Filter, LLDP-MED, Loop detection, NTP client, Port Mirror, Power Lost Warning, Relay Trigger, sFlow, SSHv2 telnet, Time Zone /Daylight Saving, DHCP Client, HTTP, HTTPS, IPv4/IPv6, LLDP, RMON, SNMPv1/v2c/v3, Syslog |
MAC Table Size | |
Ethernet | 8*10/100/1000Tx (PSE: 30W/Port), auto MDI/MDI-X connection, auto negotiation speed, Full/Half duplex mode |
Fiber Ports | 2*1G/10G SFP+ slots |
Console | 1*RS232 in RJ45 connector with console cable, 115.2Kbps, 8,N,1 |
input voltage | 48~55VDC, Redundant Input |
Housing Protection | IP30 protection, Metal |
Mounting | DIN-Rail Mounting, Wall Mount |
Operating Temperatures | -40° to 60°C |
Ambient Relative Humidity | 5 to 95%, (non-condensing) |
EMI | |
EMS | IEC61000-4-2,3,4,5,6,8, IEC61000-6-2,4 |
Free fall | |
shock | IEC60068-2-27 |
vibration | IEC60068-2-6 |
Green | |
Certification | CE, FCC, UL 61010-1, UL 61010-2-201 |